Name: Floating Fountain / Aerator
Availability: instock

Floating Fountain / Aerator

A floating fountain can act as an aerator for bodies of water such as ponds and lakes. Aerators are devices or systems that introduce air into the water, which helps improve the oxygen levels and circulation within the water body. They are commonly used in ponds and lakes to prevent issues such as algae overgrowth, fish kills, and foul odors caused by low oxygen levels. A floating fountain can serve as an aerator in the following ways: Water Movement: The fountain's jets and sprays create movement on the water's surface, promoting the mixing of oxygen from the air with the water. This enhances the exchange of gases, allowing oxygen to dissolve into the water and carbon dioxide to be released. Air Diffusion: As the water is sprayed into the air, it breaks into droplets, exposing a larger surface area to the air. This increases the contact between water and air, facilitating the transfer of oxygen from the atmosphere into the water. Circulation: The movement generated by the floating fountain helps in circulating the water in the pond or lake. This prevents the formation of stagnant areas where oxygen depletion can occur. By maintaining adequate oxygen levels, the floating fountain aerator can support aquatic life, including fish and other organisms that require oxygen for survival. It also helps prevent the buildup of organic matter and the proliferation of harmful algae, contributing to the overall health and balance of the aquatic ecosystem. It's worth noting that the effectiveness of a floating fountain as an aerator depends on various factors, such as the size of the water body, fountain design, flow rate, and environmental conditions. In some cases, a dedicated pond aerator might be more suitable, especially for larger bodies of water with specific oxygenation requirements.

Send Message

Zeolite for fish ponds

Zeolite is used in biofilters for fish ponds as a type of substrate to promote the growth of beneficial bacteria. These bacteria are responsible for breaking down harmful waste products, such as ammonia and nitrite, into less toxic compounds like nitrate. In a biofilter, water is pumped through a chamber filled with the zeolite substrate, allowing the bacteria to colonize and grow on the surface. As the water flows over the zeolite, the bacteria use the waste products as a food source, breaking them down into less harmful compounds. The use of zeolite in biofilters is beneficial because it provides a large surface area for the bacteria to grow on and it has a natural ability to absorb and retain ammonium ions. This helps to maintain a stable and healthy environment for fish in the pond by removing toxic waste products. Additionally, zeolite is a relatively low-cost and readily available material, making it a popular choice for use in fish pond biofilters.

Send Message

Floating Aerators

Floating aerators are used in a variety of applications, including wastewater treatment, aquaculture, and recreational lakes. In wastewater treatment, floating aerators are used to provide oxygen to microorganisms that break down organic waste, helping to improve water quality. In aquaculture, they are used to increase oxygen levels in fish ponds, promoting healthy growth and survival of fish and other aquatic species. In recreational lakes, floating aerators can help to reduce algae growth and improve water clarity. They can also help to keep water from becoming stagnant and reduce the risk of unpleasant odors and harmful bacteria.

Send Message

UV Water Disinfection Systems

UV Water Disinfection Systems UV Water Disinfection Systems are designed in a way that suits diverse industrial environments. The systems are categorized on the basis of the capacity of water that needs to be sterilized per hour, ranging from 350 LPH and above. We also design customized units according to clients’ requirements. The UV Radiation chamber is made with SS 316 L with electro-polish which is corrosion-resistant, particularly against chlorides and other industrial solvents. Either end of the chamber can be used as the inlet or outlet; both are directed horizontally upwards to ensure that the pressure maintained in the chamber doesn’t exceed the maximum avoiding any chances of breakage in the UV lamps. The control panel mounted on the UV Ballast has LED indicators for each lamp to notify lamp failure and it also has an hour meter to keep a check on the remaining life of the lamp. UV Water Disinfection Systems The compression nut & lamp holders are easy to use, simplifying the installation and replacement process. These systems are used for water purification in most industries, majorly production of food & beverages, cosmetics, paint industries, hotels, spas, aquaculture, hospitals, clinics, pharmaceuticals, etc. *High-Quality UV-C Lamps *High Transparency Quartz Sleeves resistant to temperature fluctuation *UV Radiation Chamber is SS 316 L electro-polished, remains unaffected by toxic environments. *Compact designs, saving a significant amount of space. *Long-lasting and less power consuming electronic ballasts, saving energy.

Send Message

8 Head Ultrasonic Mist Maker

Eight Head Atomizer The ultrasonic atomizer uses electronic high-frequency oscillation (the oscillation frequency is1.7MHz or 2.4MHz, which is beyond the range of human hearing, and the electronic oscillation isn't harmful to humans and animals), through the high-frequency resonance of the ceramic atomizer, to remove the liquid water break up the molecular structure of natural flowing mist generated, without additional heat or addition of any chemicals. High-quality material: This product uses high thermal conductivity, high corrosion resistance, high-quality 304 stainless steel; the nozzle adopts copper wafers, which has strong heat dissipation capacity and low loss; it will not rust and has a longer service life. Protection function: Water shortage protection, when the water level is lower than the induction capacitor, the power will be automatically turned off. The built-in water temperature sensor will automatically turn off the power when the water temperature is 55°C. High safety, no need to worry about potential dangers. Very safe to use. High-quality nozzle: The nozzle is designed independently, and the current of each nozzle is automatically adjusted electronically. When a single nozzle is damaged, other nozzles can work normally. Widely used: 8-head ultrasonic atomizer, which can be used for stage atomization and various gardening applications, including hydroponics, breeding, greenhouse flower humidification, viewing platforms, etc. The mist generator/fog generator uses ultrasonic electronic technology to turn water molecules into mist-like molecules, which is very suitable for use in your pond, botanical garden, rockery, fish tank, vase, swimming pool, etc. It will create a magical atmosphere, and when you use this fog generator, you will find a lot of fun. Shell material: 304 stainless steel Nozzle material: Copper Working voltage: DC 42V-48V Working Current: 4.1A-4.7A Output power: 200W Spray volume: 5 KG / H Cooling method: air cooling The best working water level: 6~7cm Precautions for the use of eight-head atomizer 1. When using this 8-head atomizer, please select the matching transformer whose output voltage is AC36V. 2. When multiple 8-head atomizers are used in the same container, the shells of the atomizers must be connected to each other to prevent electrical corrosion of the shells. 3. This atomizer is suitable for atomizing neutral liquids (PH value 5~8). Acidic liquids will corrode the shell and atomizing film, and alkaline liquids will affect the amount of atomization, reducing the 8 atomizers and The life of the atomizer sheet, and cause the water level switch to fail and damage the atomizer. 4. Please do not damage the water level switch during the installation process, so as to avoid the failure of the water level switch and cause the atomizer to lose control. Stop using the water level switch if it is damaged, otherwise the atomizer sheet will burn dry and further damage the atomizer. At this time, it can be used after being repaired by professional maintenance personnel. 5. When the atomizer is working normally, please do not put your hands on the spray cavity of the atomizer to prevent ultrasonic damage. 6. The atomizer must be in water to work normally. Please put it in the water before turning on the power, and make sure that the surface of the atomizer is in a state of water to avoid damage to the atomizer. 7. When you stop using the atomizer, please disconnect the switch power first, and then take out the atomizer from the water. Maintenance and maintenance of eight-head ultrasonic humidifier In order for your product to achieve the longest service life and best use effect, please read the following carefully. 1. After the atomizer has been working for a long time, scale will be deposited on the shell and the surface of the atomizing sheet, which will seriously affect its service life and atomization volume. Therefore, it is recommended to clean the atomizer at least every half a month. When cleaning, use a soft cloth moistened with alcohol to gently wipe the surface of the atomizer shell and the atomizer sheet. Do not clean the atomizer sheet with hard objects to avoid scratching the atomizer sheet. 2. Water quality will affect the service life of the atomizer. Clean water is recommended. 3. After the atomizer has been working for a long time (about 3000 hours), the life of the atomizer will be attenuated and the amount of atomization will be reduced. At this time, you can replace the atomizer. Please contact the distributor for the atomizer and supporting tool keys. Business or our company. The detailed description of the replacement steps is as follows: Cut off the power, take the atomizer out of the water, and put it upside down for a while. After the water in the atomizer has all flowed out, wipe the water on the spray cavity and the inner surface of the atomizer with a dry cloth. Then use the tool spoon to unscrew the pressure ring counterclockwise, remove the old transducer, and keep the cavity of the atomized transducer dry and clean. Install the new transducer with the front face up and the reverse face down, and turn the pressure ring clockwise.

Send Message

Tulip / Calyx Jet

Tulip / Calyx jet nozzle generates a sheet of water with a somewhat turbulent regime and more lifting height. Said sheet leaves the nozzle with an exit angle which causes a parabolic shot. It is in its fall when the blade breaks generating a calyx shape. It generates more noise in its normal functioning due to the broken fall of the water, which makes it suitable for outdoor sources , as an effect combined with other main ones. It is easy and attractive to illuminate said nozzle with underwater spotlights due to the low height desired with this nozzle . Available from sizes 1/2" to 3" . covering a diameter of 3 feet to 15 feet of pond.

Send Message

Tulip Fountain Jet

Calyx Jet

Calyx jet nozzle generates a sheet of water with a somewhat turbulent regime and more lifting height. Said sheet leaves the nozzle with an exit angle which causes a parabolic shot. It is in its fall when the blade breaks generating a calyx shape. It generates more noise in its normal functioning due to the broken fall of the water, which makes it suitable for outdoor sources , as an effect combined with other main ones. It is easy and attractive to illuminate said nozzle with underwater spotlights due to the low height desired with this nozzle . Available from sizes 1/2" to 21/2" . covering a diameter of 3 feet to 15 feet of pond.