'radiate outward'

Grech CPA15000 Auto Cleaning Pressurized Koi Pond Filters (15000 L/H) New pond filter generation: Bio pressure pond filter CPA-15000 Characteristics: Indicator for pollution High flow rate Optimum development of biological pond filter Easy and uncomplicated bio-pressure pond filter-system This system provides fast and reliably clear water Easy backwashing (by flipping a switch) Different filter materials (special filter foams) Advantages: Mechanical and biological pressure filter with integrated UVC-clarifier. All connections and technology are in the lid/cover, the filter can be buried to lid for concealment without difficulty. Flush back function with maintenance indicator. Cleaning and maintenance: The water can be pumped to a higher lying waterfall and then led back into the pond. The annual maintenance is limited to checking the filter media and the UV-lamp. The filter has a modern flush back function that can be adjusted by means of a switch with four functions. With the switch you have the following possibilities for setting: The EasyClean flush back function: • Switch position "Filter" Normal operation - the water passes through the pressure pond filter with the help of a pond pump and returns cleanly into the pond. • Switch position "Clean" Cleaning mode - By turning the switch the motor that is integrated in the top of the filter is switched on and makes the filter sponges rotate in the inner of the pond filter and cleans them from the coarse dirt without opening the pond filter. During the cleaning operation the dirty water is drained by an additional connection and can be used for example for garden irrigation. Filter Placement: The filter is placed at the pond side and by means of a a suitable pump (not included in delivery) connected with the water. The water circulates through the filter and the UV-device and after being cleaned is led again into the pond. Fundamental Functionality: Pond filter combine the mechanical and biological cleaning. Microorganisms settle on the filter material and remove germs and bacteria from the water. By mechanical filtering, suspended particles and dirt remain in the pond filter and by this means no longer return to the pond water. It takes about 4-6 weeks, until Filter Bacteria have sufficiently colonized the bio pond filter. Only thereafter t is advisable to switch on a UVC Pond Clarifier. Starter bacteria help to shorten the start-up phase of a new filter. Starter bacteria refer to microorganisms especially grown in a laboratory. By adding them, you can shorten the start-up phase considerably. Bacteria are active above a temperature of approximately 10°-12°C, the pond filter´s temperature should exceed 40°C. So the pond filter should be placed in the shadow and not be exposed to direct sunlight. UVC-pond clarifiers irradiate the water in a flow-through reactor with UV rays. The UV-C radiation destroys the swimming algae. The algae agglutinate to large particles and ca be easily removed by means of mechanical filtering. Our UVC clarifiers modify the tertiary and the quaternary structure of the algae proteins by means of UV-radiation. This means the destructions of the algae which can be removed from the water by pond filters.

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status: FAILED

Ring Blowers are designed for the conveying of air as well as for generating pressure or vacuum. Industrial Ring Blowers are known by many different names across the world. They are also referred to as Regenerative Blower, Side Channel Blower, Turbine Blower, Ring Compressor, Industrial Vacuum Blowers, Vortex Blower etc. Industrial Ring blowers are manufactured for both pressure and vacuum service. When a ring blower is used for pressure, it is usually configured for use as air supply units or compressors, while vacuum blowers are frequently used as vacuum pumps or fume/dust exhausters. All regenerative ring blowers consist of an impeller that spins within a housing. This housing contains both an intake channel and an outboard channel; hence the name side channel blowers. When the impeller moves past the intake port, air is drawn in and trapped between the impeller blades. As the impeller continues to turn, the air is pushed both inward and outward through both channels, and this process continues until the impeller stops rotating. It is this regenerative process that allows the side channel blower to function as both a pressure blower and a vacuum blower. While the air trapped between two impeller blades represents only a small pressure increase, the sum total of the blades, from intake to outlet, is capable of powerful continuous operating pressures. Below are some of the applications of Industrial Ring Blowers / Side Channel Blowers. Aeration Effluent treatment plant (ETP) Sewage treatment plant (STP) Aquaculture Pneumatic conveying Automatic looms Automatic bottling machines Vacuum table Plating tank agitation Hopper agitation Jacuzzis Dental and other medical suction Industrial sewing machine Sock loom Furnace air intake Features Rugged & Reliable: The impeller shaft and casing are Aluminum cast. Side Channel Blowers are built tough for continuous 24-hour operation. Minimal Lubrication Required: The rotating parts of Industrial Ring Vacuum Blowers are not in contact with the casing. There is, therefore, no friction during operation and thus no internal lubrication is necessary. Only the bearings need occasional lubrication after many hours of operation. Low Noise Level: These are direct drive units with integral silencers, which ensures low noise levels. Cleaning: When dust or residue is evident, clean the entire surface of the ring blower Lubrication: After approximately 20,000 hours of operation or 18 months, replace the grease in the bearings

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status: FAILED

An almost limitless range of interesting effects and patterns can be achieved with our Comet nozzle. Used as a single jet, or in groups, or in concert with other nozzle models, the Comet’s single, clear stream, glass-like effect can easily be configured to spray inward from the perimeter, or outward from center, and is most often incorporated into spray rings and bars.

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status: FAILED

Advantages: Mechanical and biological pressure filter with integrated UVC-clarifier. All connections and technology are in the lid/cover, the filter can be buried to lid for concealment without difficulty. Flush back function with maintenance indicator. Cleaning and maintenance: The water can be pumped to a higher lying waterfall and then led back into the pond. The annual maintenance is limited to checking the filter media and the UV-lamp. The filter has a modern flush back function that can be adjusted by means of a switch with four functions. With the switch you have the following possibilities for setting: The EasyClean flush back function: • Switch position "Filter" Normal operation - the water passes through the pressure pond filter with the help of a pond pump and returns cleanly into the pond. • Switch position "Clean" Cleaning mode - By turning the switch the motor that is integrated in the top of the filter is switched on and makes the filter sponges rotate in the inner of the pond filter and cleans them from the coarse dirt without opening the pond filter. During the cleaning operation the dirty water is drained by an additional connection and can be used for example for garden irrigation. Filter Placement: The filter is placed at the pond side and by means of a a suitable pump (not included in delivery) connected with the water. The water circulates through the filter and the UV-device and after being cleaned is led again into the pond. Fundamental Functionality: Pond filter combine the mechanical and biological cleaning. Microorganisms settle on the filter material and remove germs and bacteria from the water. By mechanical filtering, suspended particles and dirt remain in the pond filter and by this means no longer return to the pond water. It takes about 4-6 weeks, until Filter Bacteria have sufficiently colonized the bio pond filter. Only thereafter t is advisable to switch on a UVC Pond Clarifier. Starter bacteria help to shorten the start-up phase of a new filter. Starter bacteria refer to microorganisms especially grown in a laboratory. By adding them, you can shorten the start-up phase considerably. Bacteria are active above a temperature of approximately 10°-12°C, the pond filter´s temperature should exceed 40°C. So the pond filter should be placed in the shadow and not be exposed to direct sunlight. UVC-pond clarifiers irradiate the water in a flow-through reactor with UV rays. The UV-C radiation destroys the swimmig algae. The algae agglutinate to large particles and ca be easily removed by means of mechanical filtering.Our UVC clarifiers modify the tertiary and the quaternary structure of the algae proteins by means of UV-radiation. This means the destructions of the algae which can be removed from the water by pond filters.

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status: FAILED

UVC-pond clarifiers irradiate the water in a flow-through reactor with UV rays. The UV-C radiation destroys the swimmig algae. The algae agglutinate to large particles and ca be easily removed by means of mechanical filtering. UVC clarifiers modify the tertiary and the quaternary structure of the algae proteins by means of UV-radiation. This means the destructions of the algae which can be removed from the water by pond filters. The water circulates through the two inlets of the UVC-clarifier and in the process all impurities like algae, bacteria or parasites are reduced. The more this circuit is maintained the more effective is the germ reduction. UVC-power : 24 Watt UVC: Pond Size : 45000 litre Input voltage : 230VAC ~50Hz

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status: FAILED