Name: Submersible Pond Pump
Availability: instock

Submersible Pond Pump

Comparing a small 60W pond pump to a monoblock 0.5HP (Horsepower) pump involves considering factors like their capacity, power usage, and intended applications. Here's a comparison of the two: Power Consumption: A 60W pond pump consumes significantly less power compared to a 0.5HP pump. The 0.5HP pump will typically require more electricity to operate due to its higher horsepower rating. Flow Rate and Performance: A 0.5HP monoblock pump is much more powerful and capable of moving a larger volume of water compared to a 60W pump. It is generally used for larger applications such as irrigation, supplying water to a house, or industrial purposes. The 60W pond pump is designed for smaller applications like circulating water in a small garden pond or a small decorative water feature. It has a lower flow rate and is not suitable for high-demand tasks. Application: The 60W pond pump is ideal for small decorative ponds and water features where a gentle and aesthetic water flow is desired. It's not designed for heavy-duty tasks like supplying water to households or agricultural irrigation. The 0.5HP monoblock pump is suitable for larger water transfer tasks, such as filling or draining swimming pools, agricultural irrigation, or providing water pressure for a house. Cost: Typically, the 60W pond pump will be more affordable than the 0.5HP monoblock pump due to its lower capacity and power. Noise: The 60W pond pump is generally quieter compared to the 0.5HP pump, which can produce more noise due to its larger motor and capacity. In summary, the choice between a small 60W pond pump and a 0.5HP monoblock pump depends on your specific needs and the scale of the water circulation task. If you have a small decorative pond or water feature, the 60W pond pump is likely sufficient. If you need to move a larger volume of water for irrigation, household water supply, or other heavy-duty applications, the 0.5HP monoblock pump is more suitable. It's essential to match the pump's capacity to the specific requirements of your project to ensure efficient and cost-effective water circulation.

Fountain Aerators - Floating fountains

Fountains float on the surface of the water and shoot water into the air creating a fantastic display, and most times they even have lights attached to enhance the experience at night. They truly enhance the pond atmosphere and cancel out traffic noise and do turn some air into the pond. They are very good at forcing floating debris, algae, and plants like duckweed to the edges of the pond where they can be more easily removed/treated. Irrigation ponds left unmanaged can lose 1-5 inches or 2.5-5 centimeters of storage capacity a year due to sludge build-up and cause clogged pumps and irrigations systems. High nutrient levels in irrigation ponds can also lead toward turf damage, while poor water quality will often lead toward foul odors, fish kills, unsightly aquatic algae and weeds.

3 Coil Ultrasonic Humidifier / Mist Maker / Fogger

3 Coil Ultrasonic Humidifier / Mist Maker / Fogger Ultrasonic humidifier uses ultrasonic energy to transform liquids into cloud-like particles. Ultrasonic humidifier also named ultrasonic atomizer, ultrasonic mist maker, ultrasonic fogger. PRODUCT DESCRIPTION Plastic shell good heat dissipation. Water shortage protection function. Applicable to industrial, agricultural , landscape fog-making and so on With colored lights and single lights. Large atomizing amount, Stable performance, Long life Atomizing Quantity - >900ML Size - 68mm diameter 27mm height Working Frequency - 1700±50(KHZ) Diameter of piezoceramics - 20mm Working Temperature - 1～45℃ Water Level - 40mm-80mm Working Voltage - 36V AC Working Current - 2.2A Power: - 60W Material - Cooper and stainless steel LED - Yes Water Level Sensor - Height 12mm Cable - Length 5m Input Voltage - AC 220V/50HZ

3 Head Ultrasonic Mist Maker / Fogger / Humidifier

Ultrasonic humidifier uses ultrasonic energy to transform liquids into cloud-like particles. Ultrasonic humidifier also named ultrasonic atomizer, ultrasonic mist maker, ultrasonic fogger. PRODUCT DESCRIPTION Copper shell, nickel and cadmium plating, good heat dissipation. Water shortage protection function. Applicable to industrial, agricultural , landscape fog-making and so on With colored lights and single lights. Large atomizing amount, Stable performance, Long life Atomizing Quantity - >900ML Size - 68mm diameter 27mm height Working Frequency - 1700±50(KHZ) Diameter of piezoceramics - 20mm Working Temperature - 1～45℃ Water Level - 40mm-80mm Working Voltage - 36V AC Working Current - 2.2A Power: - 60W Material - Cooper and stainless steel LED - Yes Water Level Sensor - Height 12mm Cable - Length 5m Input Voltage - AC 220V/50HZ

Grech CPA15000 Auto Cleaning Pressurized Koi Pond Filters

Grech CPA15000 Auto Cleaning Pressurized Koi Pond Filters (15000 L/H) New pond filter generation: Bio pressure pond filter CPA-15000 Characteristics: Indicator for pollution High flow rate Optimum development of biological pond filter Easy and uncomplicated bio-pressure pond filter-system This system provides fast and reliably clear water Easy backwashing (by flipping a switch) Different filter materials (special filter foams) Advantages: Mechanical and biological pressure filter with integrated UVC-clarifier. All connections and technology are in the lid/cover, the filter can be buried to lid for concealment without difficulty. Flush back function with maintenance indicator. Cleaning and maintenance: The water can be pumped to a higher lying waterfall and then led back into the pond. The annual maintenance is limited to checking the filter media and the UV-lamp. The filter has a modern flush back function that can be adjusted by means of a switch with four functions. With the switch you have the following possibilities for setting: The EasyClean flush back function: • Switch position "Filter" Normal operation - the water passes through the pressure pond filter with the help of a pond pump and returns cleanly into the pond. • Switch position "Clean" Cleaning mode - By turning the switch the motor that is integrated in the top of the filter is switched on and makes the filter sponges rotate in the inner of the pond filter and cleans them from the coarse dirt without opening the pond filter. During the cleaning operation the dirty water is drained by an additional connection and can be used for example for garden irrigation. Filter Placement: The filter is placed at the pond side and by means of a a suitable pump (not included in delivery) connected with the water. The water circulates through the filter and the UV-device and after being cleaned is led again into the pond. Fundamental Functionality: Pond filter combine the mechanical and biological cleaning. Microorganisms settle on the filter material and remove germs and bacteria from the water. By mechanical filtering, suspended particles and dirt remain in the pond filter and by this means no longer return to the pond water. It takes about 4-6 weeks, until Filter Bacteria have sufficiently colonized the bio pond filter. Only thereafter t is advisable to switch on a UVC Pond Clarifier. Starter bacteria help to shorten the start-up phase of a new filter. Starter bacteria refer to microorganisms especially grown in a laboratory. By adding them, you can shorten the start-up phase considerably. Bacteria are active above a temperature of approximately 10°-12°C, the pond filter´s temperature should exceed 40°C. So the pond filter should be placed in the shadow and not be exposed to direct sunlight. UVC-pond clarifiers irradiate the water in a flow-through reactor with UV rays. The UV-C radiation destroys the swimming algae. The algae agglutinate to large particles and ca be easily removed by means of mechanical filtering. Our UVC clarifiers modify the tertiary and the quaternary structure of the algae proteins by means of UV-radiation. This means the destructions of the algae which can be removed from the water by pond filters.

5 Head Ultrasonic Mist Maker

PRODUCT DESCRIPTION Copper shell, nickel and cadmium plating, good heat dissipation. Water shortage protection function. Applicable to industrial, agricultural ,landscape fog-making and so on With colored lights and single lights. Large atomizing amount;Stable performance;Life is long; Atomizing Quantity - >1500ML Size - 99mm diamater 27mm height Working Frequency - 1700±50(KHZ) Diameter of piezoceramics - 20mm Working Temperature - 5～45℃ Overheating Protection - 50℃ Water Level - 40mm-80mm Working Voltage - 36V AC Power: - 150W Current - 1.5A Material - Cooper and stainless steel LED - Have Water Level Sensor - Height 12mm Cable - Length 5m Usearea - 41-60M2 Water tank capacity - 6-10L Voltage - 220v/50hz

3 Head Ultrasonic Mist Maker

PRODUCT DESCRIPTION Copper shell, nickel and cadmium plating, good heat dissipation. Water shortage protection function. Applicable to industrial, agricultural ,landscape fog-making and so on With colored lights and single lights. Large atomizing amount;Stable performance;Life is long; Atomizing Quantity - >900ML Size - 68mm diameter 27mm height Working Frequency - 1700±50(KHZ) Diameter of piezoceramics - 20mm Working Temperature - 1～45℃ Water Level - 40mm-80mm Working Voltage - 36V AC Working Current - 2.2A Power: - 60W Material - Cooper and stainless steel LED - one Water Level Sensor - Height 12mm Cable - Length 5m Input Voltage - AC 220V/50HZ

BIO Filter

Mechanical and biological pressure filter with integrated UVC-clarifier. All connections and technology are in the lid/cover, the filter can be buried to lid for concealment without difficulty. Flush back function with maintenance indicator. Cleaning and maintenance: The water can be pumped to a higher lying waterfall and then led back into the pond. The annual maintenance is limited to checking the filter media and the UV-lamp. The filter has a modern flush back function that can be adjusted by means of a switch with four functions. With the switch you have the following possibilities for setting: The EasyClean flush back function: • Switch position "Filter" Normal operation - the water passes through the pressure pond filter with the help of a pond pump and returns cleanly into the pond. • Switch position "Clean" Cleaning mode - By turning the switch the motor that is integrated in the top of the filter is switched on and makes the filter sponges rotate in the inner of the pond filter and cleans them from the coarse dirt without opening the pond filter. During the cleaning operation the dirty water is drained by an additional connection and can be used for example for garden irrigation. Filter Placement: The filter is placed at the pond side and by means of a a suitable pump (not included in delivery) connected with the water. The water circulates through the filter and the UV-device and after being cleaned is led again into the pond. Fundamental Functionality: Pond filter combine the mechanical and biological cleaning. Microorganisms settle on the filter material and remove germs and bacteria from the water. By mechanical filtering, suspended particles and dirt remain in the pond filter and by this means no longer return to the pond water. It takes about 4-6 weeks, until Filter Bacteria have sufficiently colonized the bio pond filter. Only thereafter t is advisable to switch on a UVC Pond Clarifier. Starter bacteria help to shorten the start-up phase of a new filter. Starter bacteria refer to microorganisms especially grown in a laboratory. By adding them, you can shorten the start-up phase considerably. Bacteria are active above a temperature of approximately 10°-12°C, the pond filter´s temperature should exceed 40°C. So the pond filter should be placed in the shadow and not be exposed to direct sunlight. UVC-pond clarifiers irradiate the water in a flow-through reactor with UV rays. The UV-C radiation destroys the swimmig algae. The algae agglutinate to large particles and ca be easily removed by means of mechanical filtering.Our UVC clarifiers modify the tertiary and the quaternary structure of the algae proteins by means of UV-radiation. This means the destructions of the algae which can be removed from the water by pond filters.