Name: 3 Coil Ultrasonic Humidifier / Mist Maker / Fogger
Availability: instock

3 Coil Ultrasonic Humidifier / Mist Maker / Fogger

3 Coil Ultrasonic Humidifier / Mist Maker / Fogger Ultrasonic humidifier uses ultrasonic energy to transform liquids into cloud-like particles. Ultrasonic humidifier also named ultrasonic atomizer, ultrasonic mist maker, ultrasonic fogger. PRODUCT DESCRIPTION Plastic shell good heat dissipation. Water shortage protection function. Applicable to industrial, agricultural , landscape fog-making and so on With colored lights and single lights. Large atomizing amount, Stable performance, Long life Atomizing Quantity - >900ML Size - 68mm diameter 27mm height Working Frequency - 1700±50(KHZ) Diameter of piezoceramics - 20mm Working Temperature - 1～45℃ Water Level - 40mm-80mm Working Voltage - 36V AC Working Current - 2.2A Power: - 60W Material - Cooper and stainless steel LED - Yes Water Level Sensor - Height 12mm Cable - Length 5m Input Voltage - AC 220V/50HZ

10 Disc Ultrasonic humidifier / Mist maker / Fogger

10 Head Ultrasonic Mist Maker uses the high-frequency resonance of the disc to throw water away from the water surface to create a natural mist, increase air humidity and refresh the air. 10 Head Pond Fogger with waterproof power supply and float; Voltage:220V; Size: 28*85*52mm; Maximum evaporation: 7000ml/H; Use Ambient Temperature: +5~45℃; Use Environmental Water Depth: 7-9cm; suitable for pond, tank, festival, especially Halloween, Christmas, etc. The 10 head Mist Maker Fogger adopts the waterproof power supply instead of moisture-proof one. The waterproof power supply is suitable for dry/humid environment, and it will not be damaged due to the generation of fog, longer service life. Using precision capacitive sensor head, automatic power-off protection in case of water shortage, no dry burning, no scaling, effectively extend the service life.

3 Head Ultrasonic Mist Maker / Fogger / Humidifier

Ultrasonic humidifier uses ultrasonic energy to transform liquids into cloud-like particles. Ultrasonic humidifier also named ultrasonic atomizer, ultrasonic mist maker, ultrasonic fogger. PRODUCT DESCRIPTION Copper shell, nickel and cadmium plating, good heat dissipation. Water shortage protection function. Applicable to industrial, agricultural , landscape fog-making and so on With colored lights and single lights. Large atomizing amount, Stable performance, Long life Atomizing Quantity - >900ML Size - 68mm diameter 27mm height Working Frequency - 1700±50(KHZ) Diameter of piezoceramics - 20mm Working Temperature - 1～45℃ Water Level - 40mm-80mm Working Voltage - 36V AC Working Current - 2.2A Power: - 60W Material - Cooper and stainless steel LED - Yes Water Level Sensor - Height 12mm Cable - Length 5m Input Voltage - AC 220V/50HZ

Grech CPA15000 Auto Cleaning Pressurized Koi Pond Filters

Grech CPA15000 Auto Cleaning Pressurized Koi Pond Filters (15000 L/H) New pond filter generation: Bio pressure pond filter CPA-15000 Characteristics: Indicator for pollution High flow rate Optimum development of biological pond filter Easy and uncomplicated bio-pressure pond filter-system This system provides fast and reliably clear water Easy backwashing (by flipping a switch) Different filter materials (special filter foams) Advantages: Mechanical and biological pressure filter with integrated UVC-clarifier. All connections and technology are in the lid/cover, the filter can be buried to lid for concealment without difficulty. Flush back function with maintenance indicator. Cleaning and maintenance: The water can be pumped to a higher lying waterfall and then led back into the pond. The annual maintenance is limited to checking the filter media and the UV-lamp. The filter has a modern flush back function that can be adjusted by means of a switch with four functions. With the switch you have the following possibilities for setting: The EasyClean flush back function: • Switch position "Filter" Normal operation - the water passes through the pressure pond filter with the help of a pond pump and returns cleanly into the pond. • Switch position "Clean" Cleaning mode - By turning the switch the motor that is integrated in the top of the filter is switched on and makes the filter sponges rotate in the inner of the pond filter and cleans them from the coarse dirt without opening the pond filter. During the cleaning operation the dirty water is drained by an additional connection and can be used for example for garden irrigation. Filter Placement: The filter is placed at the pond side and by means of a a suitable pump (not included in delivery) connected with the water. The water circulates through the filter and the UV-device and after being cleaned is led again into the pond. Fundamental Functionality: Pond filter combine the mechanical and biological cleaning. Microorganisms settle on the filter material and remove germs and bacteria from the water. By mechanical filtering, suspended particles and dirt remain in the pond filter and by this means no longer return to the pond water. It takes about 4-6 weeks, until Filter Bacteria have sufficiently colonized the bio pond filter. Only thereafter t is advisable to switch on a UVC Pond Clarifier. Starter bacteria help to shorten the start-up phase of a new filter. Starter bacteria refer to microorganisms especially grown in a laboratory. By adding them, you can shorten the start-up phase considerably. Bacteria are active above a temperature of approximately 10°-12°C, the pond filter´s temperature should exceed 40°C. So the pond filter should be placed in the shadow and not be exposed to direct sunlight. UVC-pond clarifiers irradiate the water in a flow-through reactor with UV rays. The UV-C radiation destroys the swimming algae. The algae agglutinate to large particles and ca be easily removed by means of mechanical filtering. Our UVC clarifiers modify the tertiary and the quaternary structure of the algae proteins by means of UV-radiation. This means the destructions of the algae which can be removed from the water by pond filters.

8 Head Ultrasonic Mist Maker

Eight Head Atomizer The ultrasonic atomizer uses electronic high-frequency oscillation (the oscillation frequency is1.7MHz or 2.4MHz, which is beyond the range of human hearing, and the electronic oscillation isn't harmful to humans and animals), through the high-frequency resonance of the ceramic atomizer, to remove the liquid water break up the molecular structure of natural flowing mist generated, without additional heat or addition of any chemicals. High-quality material: This product uses high thermal conductivity, high corrosion resistance, high-quality 304 stainless steel; the nozzle adopts copper wafers, which has strong heat dissipation capacity and low loss; it will not rust and has a longer service life. Protection function: Water shortage protection, when the water level is lower than the induction capacitor, the power will be automatically turned off. The built-in water temperature sensor will automatically turn off the power when the water temperature is 55°C. High safety, no need to worry about potential dangers. Very safe to use. High-quality nozzle: The nozzle is designed independently, and the current of each nozzle is automatically adjusted electronically. When a single nozzle is damaged, other nozzles can work normally. Widely used: 8-head ultrasonic atomizer, which can be used for stage atomization and various gardening applications, including hydroponics, breeding, greenhouse flower humidification, viewing platforms, etc. The mist generator/fog generator uses ultrasonic electronic technology to turn water molecules into mist-like molecules, which is very suitable for use in your pond, botanical garden, rockery, fish tank, vase, swimming pool, etc. It will create a magical atmosphere, and when you use this fog generator, you will find a lot of fun. Shell material: 304 stainless steel Nozzle material: Copper Working voltage: DC 42V-48V Working Current: 4.1A-4.7A Output power: 200W Spray volume: 5 KG / H Cooling method: air cooling The best working water level: 6~7cm Precautions for the use of eight-head atomizer 1. When using this 8-head atomizer, please select the matching transformer whose output voltage is AC36V. 2. When multiple 8-head atomizers are used in the same container, the shells of the atomizers must be connected to each other to prevent electrical corrosion of the shells. 3. This atomizer is suitable for atomizing neutral liquids (PH value 5~8). Acidic liquids will corrode the shell and atomizing film, and alkaline liquids will affect the amount of atomization, reducing the 8 atomizers and The life of the atomizer sheet, and cause the water level switch to fail and damage the atomizer. 4. Please do not damage the water level switch during the installation process, so as to avoid the failure of the water level switch and cause the atomizer to lose control. Stop using the water level switch if it is damaged, otherwise the atomizer sheet will burn dry and further damage the atomizer. At this time, it can be used after being repaired by professional maintenance personnel. 5. When the atomizer is working normally, please do not put your hands on the spray cavity of the atomizer to prevent ultrasonic damage. 6. The atomizer must be in water to work normally. Please put it in the water before turning on the power, and make sure that the surface of the atomizer is in a state of water to avoid damage to the atomizer. 7. When you stop using the atomizer, please disconnect the switch power first, and then take out the atomizer from the water. Maintenance and maintenance of eight-head ultrasonic humidifier In order for your product to achieve the longest service life and best use effect, please read the following carefully. 1. After the atomizer has been working for a long time, scale will be deposited on the shell and the surface of the atomizing sheet, which will seriously affect its service life and atomization volume. Therefore, it is recommended to clean the atomizer at least every half a month. When cleaning, use a soft cloth moistened with alcohol to gently wipe the surface of the atomizer shell and the atomizer sheet. Do not clean the atomizer sheet with hard objects to avoid scratching the atomizer sheet. 2. Water quality will affect the service life of the atomizer. Clean water is recommended. 3. After the atomizer has been working for a long time (about 3000 hours), the life of the atomizer will be attenuated and the amount of atomization will be reduced. At this time, you can replace the atomizer. Please contact the distributor for the atomizer and supporting tool keys. Business or our company. The detailed description of the replacement steps is as follows: Cut off the power, take the atomizer out of the water, and put it upside down for a while. After the water in the atomizer has all flowed out, wipe the water on the spray cavity and the inner surface of the atomizer with a dry cloth. Then use the tool spoon to unscrew the pressure ring counterclockwise, remove the old transducer, and keep the cavity of the atomized transducer dry and clean. Install the new transducer with the front face up and the reverse face down, and turn the pressure ring clockwise.

5 Head Ultrasonic Mist Maker

PRODUCT DESCRIPTION Copper shell, nickel and cadmium plating, good heat dissipation. Water shortage protection function. Applicable to industrial, agricultural ,landscape fog-making and so on With colored lights and single lights. Large atomizing amount;Stable performance;Life is long; Atomizing Quantity - >1500ML Size - 99mm diamater 27mm height Working Frequency - 1700±50(KHZ) Diameter of piezoceramics - 20mm Working Temperature - 5～45℃ Overheating Protection - 50℃ Water Level - 40mm-80mm Working Voltage - 36V AC Power: - 150W Current - 1.5A Material - Cooper and stainless steel LED - Have Water Level Sensor - Height 12mm Cable - Length 5m Usearea - 41-60M2 Water tank capacity - 6-10L Voltage - 220v/50hz

3 Head Ultrasonic Mist Maker

PRODUCT DESCRIPTION Copper shell, nickel and cadmium plating, good heat dissipation. Water shortage protection function. Applicable to industrial, agricultural ,landscape fog-making and so on With colored lights and single lights. Large atomizing amount;Stable performance;Life is long; Atomizing Quantity - >900ML Size - 68mm diameter 27mm height Working Frequency - 1700±50(KHZ) Diameter of piezoceramics - 20mm Working Temperature - 1～45℃ Water Level - 40mm-80mm Working Voltage - 36V AC Working Current - 2.2A Power: - 60W Material - Cooper and stainless steel LED - one Water Level Sensor - Height 12mm Cable - Length 5m Input Voltage - AC 220V/50HZ

BIO Filter

Mechanical and biological pressure filter with integrated UVC-clarifier. All connections and technology are in the lid/cover, the filter can be buried to lid for concealment without difficulty. Flush back function with maintenance indicator. Cleaning and maintenance: The water can be pumped to a higher lying waterfall and then led back into the pond. The annual maintenance is limited to checking the filter media and the UV-lamp. The filter has a modern flush back function that can be adjusted by means of a switch with four functions. With the switch you have the following possibilities for setting: The EasyClean flush back function: • Switch position "Filter" Normal operation - the water passes through the pressure pond filter with the help of a pond pump and returns cleanly into the pond. • Switch position "Clean" Cleaning mode - By turning the switch the motor that is integrated in the top of the filter is switched on and makes the filter sponges rotate in the inner of the pond filter and cleans them from the coarse dirt without opening the pond filter. During the cleaning operation the dirty water is drained by an additional connection and can be used for example for garden irrigation. Filter Placement: The filter is placed at the pond side and by means of a a suitable pump (not included in delivery) connected with the water. The water circulates through the filter and the UV-device and after being cleaned is led again into the pond. Fundamental Functionality: Pond filter combine the mechanical and biological cleaning. Microorganisms settle on the filter material and remove germs and bacteria from the water. By mechanical filtering, suspended particles and dirt remain in the pond filter and by this means no longer return to the pond water. It takes about 4-6 weeks, until Filter Bacteria have sufficiently colonized the bio pond filter. Only thereafter t is advisable to switch on a UVC Pond Clarifier. Starter bacteria help to shorten the start-up phase of a new filter. Starter bacteria refer to microorganisms especially grown in a laboratory. By adding them, you can shorten the start-up phase considerably. Bacteria are active above a temperature of approximately 10°-12°C, the pond filter´s temperature should exceed 40°C. So the pond filter should be placed in the shadow and not be exposed to direct sunlight. UVC-pond clarifiers irradiate the water in a flow-through reactor with UV rays. The UV-C radiation destroys the swimmig algae. The algae agglutinate to large particles and ca be easily removed by means of mechanical filtering.Our UVC clarifiers modify the tertiary and the quaternary structure of the algae proteins by means of UV-radiation. This means the destructions of the algae which can be removed from the water by pond filters.