Hailea Pond Pump H25000 High Flow Rate Pond for Large Pond Size Pond Pump Water Pump The Hailea Pond Pump H25000 is designed for high-performance pond and waterfall applications, making it ideal for large water features. With a powerful flow rate of 4, 200 liters per hour, it efficiently handles solids like fish waste, ensuring clean and clear water. This versatile amphibious pump can be used both underwater and above, providing flexibility for various setups. Its energy-efficient design not only saves money but also features a built-in thermal protector for safe operation. Durable and resistant to corrosion, this pump is perfect for both fresh and marine water environments. Hailea Pond Pump H25000 High Flow Rate Pond for Large Pond Size Design for the following area: •High performance pond and waterfall pump. It is capable of pumping solids such as fish waste from your pond to your external filter. •Ideal for Water features, Pond Circulation, Waterfalls, Fountains Streams, Marine Aquariums and Industrial etc. This pump is perfect for architectural water features requiring an quiet pond pump. Feature: •Amphibious Pump - dual use for under or above the water •Vortex impeller •Energy efficient =save money •Strong Water flow 4, 200 Liters per hour and pumping capacity which make it ideal for waterfall and filtration system; •Suitable for fresh and marine water; •ldeal for use in polluted water, up to a 6 mm grain size •Anti-corrosive and wear resistant ceramic shaft; •Motor have built in thermal protector to prevent motor from overhear (Safe and durable); •Strainer to protect the impeller; •This Submersible pump can be connected up as Inline/external use if mounted externally below the level of the pond surface & with no plumbing leaks Technical Specifications: •Rated power: 600 watts •Voltage: 220-240V •Frequency: 60Hz •Delivery height: max 9.5meters •Capacity: max 22, 000 litres/hr •Solids handling: 0-6mm •Cable Length: 5m •Outlet Diameter Options: 1.5" and 2" •Dimension: 38x15.3x19cm FOR AMBPHIBIOUS SETUP : Once you setup the Amphibious (Hose inlet and Hose outlet), before turning it on, you have to fill the water all of the hose completely to cycle the water smoothly. If you fail not to do this, chances are that the pump may result to overheat the pump and cause permanent damage and automatically void its warranty.