Ring Blowers are designed for the conveying of air as well as for generating pressure or vacuum. Industrial Ring Blowers are known by many different names across the world. They are also referred to as Regenerative Blower, Side Channel Blower, Turbine Blower, Ring Compressor, Industrial Vacuum Blowers, Vortex Blower etc.
Industrial Ring blowers are manufactured for both pressure and vacuum service. When a ring blower is used for pressure, it is usually configured for use as air supply units or compressors, while vacuum blowers are frequently used as vacuum pumps or fume/dust exhausters.
All regenerative ring blowers consist of an impeller that spins within a housing. This housing contains both an intake channel and an outboard channel; hence the name side channel blowers. When the impeller moves past the intake port, air is drawn in and trapped between the impeller blades. As the impeller continues to turn, the air is pushed both inward and outward through both channels, and this process continues until the impeller stops rotating.
It is this regenerative process that allows the side channel blower to function as both a pressure blower and a vacuum blower. While the air trapped between two impeller blades represents only a small pressure increase, the sum total of the blades, from intake to outlet, is capable of powerful continuous operating pressures.
Below are some of the applications of Industrial Ring Blowers / Side Channel Blowers.
Aeration
Effluent treatment plant (ETP)
Sewage treatment plant (STP)
Aquaculture
Pneumatic conveying
Automatic looms
Automatic bottling machines
Vacuum table
Plating tank agitation
Hopper agitation
Jacuzzis
Dental and other medical suction
Industrial sewing machine
Sock loom
Furnace air intake
Features
Rugged & Reliable: The impeller shaft and casing are Aluminum cast. Side Channel Blowers are built tough for continuous 24-hour operation.
Minimal Lubrication Required: The rotating parts of Industrial Ring Vacuum Blowers are not in contact with the casing. There is, therefore, no friction during operation and thus no internal lubrication is necessary. Only the bearings need occasional lubrication after many hours of operation.
Low Noise Level: These are direct drive units with integral silencers, which ensures low noise levels.
Cleaning: When dust or residue is evident, clean the entire surface of the ring blower
Lubrication: After approximately 20, 000 hours of operation or 18 months, replace the grease in the bearings
Keywords
use
ETP
STP
world
grease
outlet
Dental
casing
contact
residue
housing
Features
channels
Jacuzzis
friction
bearings
Aeration
Cleaning
sum total
Sock loom
18 months
many hours
intake port
compressors
Aquaculture
Vacuum table
vacuum pumps
applications
20, 000 hours
Aluminum cast
Vortex Blower
Turbine Blower
vacuum service
intake channel
rotating parts
entire surface
impeller shaft
pressure blower
Automatic looms
Ring Compressor
Low Noise Level
outboard channel
air supply units
integral silencers
direct drive units
Furnace air intake
Minimal Lubrication
Pneumatic conveying
Regenerative Blower
two impeller blades
many different names
fume/dust exhausters
internal lubrication
regenerative process
other medical suction
occasional lubrication
Sewage treatment plant
Industrial Ring Blowers
small pressure increase
Effluent treatment plant
regenerative ring blowers
Industrial Vacuum Blowers
Industrial sewing machine
name side channel blowers
Automatic bottling machines
continuous 24-hour operation
Industrial Ring Vacuum Blowers
powerful continuous operating pressures
Plating tank agitation
Hopper agitation
